Our Shop

DEI's ORIGINAL Titanium(TM) exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800°F direct/2500°F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Note of Caution:Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems:DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. One 50 foot roll of 1 inch wide titanium exhaust wrap. DEI's ORIGINAL Titanium(TM) exhaust wrap, with LR Technology, is made from pulverized lava rock, stranded into a fiber material and woven into a proprietary weave. Titanium wrap is engineered to be stronger than most wraps and more durable for improved thermal performance and reliability. Perfect for any automotive or motorcycle application! Withstands 1800F direct/2500F intermittent heat Promotes increased flow for improved performance Reduces temperature & vibration breakdown Extremely pliable for a tight and secure wrap DEI HT Silicone Coating not required Pre-wetting roll not necessary for wrapping Hi-tech carbon fiber look High resistance to abrasions, oil spills, temperatures and vibration breakdown NOTE: Wrapping of the catalytic converter is not recommended, as overheating can lead to reduced lifetime of the converter. Instead, try our Corvette Catalytic Converter Shield or create your own shield using our Floor & Tunnel Shield II(TM). Note of Caution:Wrap is not designed to be moved or removed after it has been heat cycled. After the fibers have been heated, they lose their initial flexibility. This does not reduce the thermal properties of the exhaust wrap. Be aware of this before you decide to remove the wrap. For this reason, you should avoid wrapping any flex-pipes or flex-joints. Note about Titanium Exhaust Systems:DEI does NOT recommend wrapping exhausts made of titanium. The alloys used in the production of titanium exhaust systems tend to be thin and are designed to dissipate heat quickly. Wrapping any titanium exhaust pipe, regardless of brand, can hold in too much heat, and make the titanium alloy turn brittle and prone to premature cracking. If you are seeking to reduce the heat on a titanium exhaust system, DEI recommends using alternatives such as our flexible heat shields. Universal

• Withstands 1800 Degrees F Direct/2500 Degrees F Intermittent Heat
• Promotes Increased Flow For Improved Performance
• Extremely Pliable For A Tight And Secure Wrap
• Pre-Wetting Roll Not Necessary For Wrapping
• Reduces Temperature/Vibration Breakdown
• DEI HT Silicone Coating Not Required
• Hi-Tech Carbon Fiber Look

Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500°F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000°F of intermittent heat Includes 16 inches of black Fire Tape Size: 1 inch x 36 inches Fitment Chart AN Conversion Chart AN Size Metal Tube O.D. Thread Size 2 1/8 in. 5/16 24 SAE 3 3/16 in. 3/8 24 SAE 4 1/4 in. 7/16 20 SAE 5 5/16 in. 3/8 18 SAE 6 3/8 in. 9/16 18 SAE 8 1/2 in. 3/4 16 SAE 10 5/8 in. 7/8 14 SAE 12 3/4 in. 1-1/16 12 SAE 16 1 in. 1-5/16 12 SAE 20 1-1/4 in. 1-5/8 12 SAE 24 1-1/2 in. 1-7/8 12 SAE 28 1-3/4 in. 2-1/4 12 SAE 32 2 in. 2-1/2 12 SAE Fire Sleeve Application Chart Part# Name Line Size* 10470 3/8 in. Fire Sleeve 3AN4AN6AN** 10472 5/8 in. Fire Sleeve 6AN8AN 10474 1 in. Fire Sleeve 10AN12AN16AN**5/8 in. Heater Hose3/4 in. Heater Hose *Braided Kevlar line was used in testing. You may notice a slight difference in size if you have Braided Stainless Steel lines. **Tight fit: If you have fittings on your line, you may need to order one size up. You can achieve between 1/16 in. and 1/8 in. stretch out of our material. This may help on installs with fittings already on the lines. One 36 inch length of Fire Sleeve with a 1 inch inside diameter and one 1 inch by 3 foot roll of silicone tape. Fire Sleeve solves the problem of heat and abrasions damaging fuel, transmission and brake lines and is a fireproof solution. Constructed from a high temperature resistant braided glass material, woven into a sleeve and heavily coated with 100% iron oxide silicone rubber, Fire Sleeve thermal insulator sleeve provides the ultimate in heat insulation and protection from direct heat up to 500F. Includes a 16-inch length of black Fire Tape, an adhesive-free, self-adhering tape, to finish off ends of Fire Sleeve or when joining two Fire Sleeves together while presenting a clean and professional look. Insulates wiring, hoses, oil / brakes / transmission lines & more Use for bundling & protecting hoses, electrical wiring, etc. Withstands 2000F of intermittent heat Includes 16 inches of black Fire Tape Size: 1 inch x 36 inches Universal

• Withstands 500 Degrees F Continuous/2000 Degrees F Intermittent Heat
• Use For Bundling And Protecting Hoses/Electrical Wiring etc.
• Insulates Wiring/Hoses/Oil/Brake/Transmission Lines And More
• Burn Protection During Under Hood Repairs And Maintenance
• Includes 16 In. Length Of Fire Tape
• 1 in. x 3 ft Length Of Fire Sleeve

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components. One 36 inch length of Heat Sheath with a 1-1/2 inch inside diameter. Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F. Pliable for tight bends Capable of withstanding 2000F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns andDO NOT apply directly to exhaust components. Universal

• Capable Of Withstanding 500 Degrees F Direct/2000 Degrees F Radiant Heat
• Pliable For Tight Bends
• Trim To Desired Length

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components. One 36 inch length of Heat Sheath with a 1-1/4 inch inside diameter. Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F. Pliable for tight bends Capable of withstanding 2000F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns andDO NOT apply directly to exhaust components. Universal

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Trim To Desired Length

Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500°F. Pliable for tight bends Capable of withstanding 2000°F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns and/or custom cut lengths of material cannot be returned. *DO NOT apply directly to exhaust components. One 36 inch length of Heat Sheath with a 1/2 inch inside diameter. Heat Sheath(TM) solves the problem of heat and abrasions causing failure of lines, hoses & wires. Designed to slide over wires, cables and hoses, Heat Sheath provides the ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500F. Pliable for tight bends Capable of withstanding 2000F radiant heat Trim to desired length NOTE: Each diameter is available up to 50 ft lengths. Other diameters are also available as a special order. Items with custom cut patterns andDO NOT apply directly to exhaust components. Universal

• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Quick, easy installation: simply unhook the line or hose, cut to desired length, slide on, and reattach.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• Trim To Desired Length

Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length *DO NOT apply directly to exhaust components. One 36 inch length of Heat Shroud with a 1/2 to 1-1/2 inch inside diameter. Heat Shroud(TM) solves the problem of heat and abrasions causing failure of lines, hoses and wires without the need to disconnect them. Heat Shroud is made from a high temperature rated glass fiber fabric with an aluminized outer facing. Same as Heat Sheath but with the added convenience of hook & loop closure design along the open edges. Without the need of removing one end of connected wires, cables and hoses, simply wrap Heat Shroud around whatever needs protection and close edges. Heat Shroud protects against oil, dirt, road grime and is fireproof, can be shaped to fit the tightest bends and is available in multiple sizes to offer the versatility of fitting diameters from 0.5 - 2.5 inches. No need to remove wires and hoses Convenient hook & loop closure design Available is sizes ranging 0.5 - 2.5 inches in diameter Reflects 90% of radiant heat Easily trim to length DO NOT apply directly to exhaust components. Universal

• Quick, tool-free installation, no line or hose removal required. Cut to desired length, slide on, and secure with hook-and-loop closure. Adjustable diameter fits most hose and line sizes.
• Reinforced with aramid thread for outstanding heat resistance, abrasion durability, and flame-retardant performance in high-temperature environments.
• Precision-engineered using 19 oz high-temperature heat treated glass fiber insulation, finished with a durable aluminum outer layer.
• Keeps lines and hoses cool, flexible, and protected-resists abrasion and reflects damaging radiant heat up to 2000F.
• Proudly manufactured in the USA with a focus on quality and craftsmanship.
• 1 in. X 3 ft.